You are here: Home > news >

How To Build Oil Production Facility

Oil production facility line introduction:

a. Cleaning device:remove the raw material skin in various impurities, such as: iron, stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.

b.Crushing machine: walnut is crushed into 6-8 pieces. In order to meet the requirements of crushing, the material is suitable for crushing with the moisture of 7% to 12%.

c. Softening process:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.

d. Flaking process: rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.

e. Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.

f. Pre-press: press the flakes to leave about 16%-18% in the cake. The cake will go to extraction process.

Video: https://www.youtube.com/watch?v=nFGwMKLsY38 

Palm fruit oil processing facilities : http://www.oilfacility.com/news/183.html